NVIDIA: Retro-front riguardo all’Enthusiast Key

 

nvidia-geforce-gtx-1080-sli-jpg-70f12c5efebd892e19f89d48d451723d2

NVIDIA col lancio della nuova serie ammiraglia di GPU con architettura Pascal (GeForce GTX 1080) ha presentato un nuovo connettore per lo SLI chiamato SLI HB Bridge. La nuova interfaccia SLI HB permette di lavorare a 650MHz in dual-Link rispetto ai 400MHz in single-link dei Bridge precedenti. Un boost della banda più che doppio e che da notevoli vantaggi rispetto alla vecchia generazione, soluzione veramente molto vantaggiosa a risoluzioni superiori al 1440p come 4K, 5K e surround.

multigpu

Per utilizzare a pieno la nuova interfaccia NVIDIA utilizza dunque entrambi i connettori SLI presenti nella scheda, per questa ragione inizialmente si era parlato di un mancato supporto di soluzioni a più di 2 GPU, facendo capire che fosse possibile un “abbandono” del supporto a configurazione in 3 e 4 way SLI.
NVIDIA ha presto smentito queste voci, affermando che le soluzioni a più di 2 GPU non verranno abbandonate, ma rese disponibili mediante sblocco dei drivers  (previo utilizzo di SLI Bridge della precedente generazione) grazie ad una “Enthusiast Key” fornita su richiesta mediante sito dedicato ufficiale.recomendedNVIDIA ha però fatto completamente retrofront, abolendo questa “Enthusiast Key” e sbloccando definitivamente le configurazioni 3 e 4 way SLI direttamente, queste soluzioni saranno però sbloccate esclusivamente per software e giochi selezionati, diventando di fatto soluzioni mirate solo al benchmark, di seguito uno stralcio della discussione “ufficiale” su reddit dove si fa chiarezza sull’argomento:

“After writing this story, but before publication, we went to NVIDIA for comment. As we were getting ready to publish, the company updated me with a shift in its stance on multi-GPU configurations. NVIDIA will no longer require an “enthusiast key” to enable SLI on more than two GPUs. However, NVIDIA will also only be enabling 3-Way and 4-Way SLI for a select few applications.”

“NVIDIA will enable support for three and four card configurations in future drivers (without a key) for specific overclocking/benchmarking tools only, as a way to make sure the GeForce brand doesn’t fall off the 3DMark charts. Only those specific applications will be able operate in the 3-Way and 4-Way SLI configurations that you have come to know. There are no profiles to change manually and even the rare games that might have “just worked” with three or four GPUs will not take advantage of more than two GTX 10-series cards. It’s fair to say at this point that except for the benchmarking crowd, NVIDIA 3-Way and 4-Way SLI is over.”

A questo link trovate la discussione di cui sopra.